Adventure Riding on the Fluent and Ehline with Trip Longer

Ali Becker is one half of the Ali and Mat duo known as Trip Longer. They shared this blog about some of the gear that keeps them rolling.

I’m a firm believer that the best bikepacking gear is the gear you don’t have to think about.

The stuff that does its job, day after day, without needing constant maintenance or attention. And after more than 60,000 kilometres of bike travel, I really value components I can put my full trust in. 

Because when I’m bombing down a remote gravel road at 50 km/h, hundreds of kilometres from the nearest bike shop (or hospital), I don’t want to spend even a second wondering if something underneath me is going to hold up.

So when my friend Mathieu and I started dreaming up the bikes we’d be riding on the Great Divide Mountain Bike Route and Golden Gravel Trail this summer, we put a LOT of thought into our wheels.

Between the two routes, we’d be riding more than 10,000 kilometres on everything from smooth gravel and quiet pavement to washboard, sand, loose rock, chunky doubletrack and rough mountain passes, all on fully loaded rigid bikes.

We wanted wheels that were durable enough to take all of that abuse, light enough that we weren’t dragging unnecessary weight up thousands of metres of elevation, and reliable enough to go largely unnoticed.

We also wanted tires that could handle the rough stuff and give us traction and comfort without feeling like we were pedaling through molasses every time we hit pavement.

It seemed like a tall ask, but here’s what we came up with.

The Setup: Built for the Long Haul

We built our wheels around 32-hole Teravail Fluent Carbon Mountain Bike Rims, paired with OneUp Boost hubs and Teravail Ehline Gen 2 29 x 2.5-inch tires.

For us, this combination hit a really nice sweet spot between durability, weight, versatility and comfort.

Teravail Fluent Carbon Mountain Bike Rim

One of the things we really liked about the Fluent Carbon rim was the flexibility to build the wheel around our specific bikes and needs.

Rather than buying a complete wheelset and taking whatever hub, spoke count and configuration came with it, we could choose the pieces we wanted.

We went with 32 spokes because, for us, durability mattered more than saving a few grams. These wheels weren't just carrying us, they were carrying all of our camping gear, electronics, food and, in some sections, up to six litres of water per person.

We paired the rims with OneUp Boost hubs, using 15 x 110 mm spacing up front and 12 x 148 mm in the rear. The wider Boost spacing helps create a stiffer, stronger wheel by allowing a wider hub and better spoke bracing, while also giving us the axle standards we needed for our bikes.

We also liked that the OneUp hubs are relatively lightweight and serviceable. When you're building a bike that's meant to take you into remote places, being able to maintain and repair your components matters.

And, honestly, the fact that they sound SO COOL didn't hurt.

Another thing we hadn't really appreciated until previous builds was the importance of rim width.

On past bikes, we'd run into limitations where the rims were too narrow to run the wider tires we eventually wanted. This time, we wanted to build around the ability for the rim to handle a wider 29-inch tire from the beginning.

The Fluent Carbon rims gave us the flexibility we wanted when it came to hub and tire preference, and being a tubeless-ready rim was the icing on the cake. All we needed now was some rim tape, sealant and the perfect set of tires to get us rolling.

Teravail Ehline Gen 2 — 29 x 2.5"

For me, comfort is king on long days in the saddle.

Yes, efficiency matters. I still want a tire that rolls nicely on pavement and doesn't feel like I'm pushing a tractor uphill. But I'm not racing, and when I'm spending day after day on a rigid bike, I'll happily trade a tiny bit of efficiency for a whole lot more comfort.

The widest tire Mat or I had ridden on a backpacking trip before this was a 2.35", so moving up to a 2.5" was a bit of an experiment for us, and it was absolutely worth it.

Being set up tubeless meant we could run lower tire pressures, which is especially valuable on our rigid bikes because the tire acts as a form of suspension, absorbing a lot of the shock and rattling that can happen on rough roads. 

(We generally ran somewhere around 17–21 PSI, depending on the terrain, load and conditions.)

Instead of a firm tubed tire (or just a tire at a high PSI) bouncing over every root, rock and crack in the road, the larger volume with lower pressure allows the tire to “deform itself” around the terrain.

That means more traction, less vibration and a noticeably more comfortable ride, not just on gravel roads, but over cracks and dips on paved roads, too! Also, the wider, lower pressure tires float amazingly well on sand and soft terrain, which we had our fair share of. 

The Great Divide threw everything from washboard and loose rock to chunky doubletrack, sand, and rocky descents at us. The Golden Gravel Trail has a similar mix of terrain, with plenty of rough gravel, sand, dirt roads, and some stretches of broken pavement.

The Ehlines have handled all of it really well.

They roll surprisingly nicely on pavement and hardpack, but still give us enough tread and traction when the road gets loose, steep or rocky.

And the tubeless setup definitely got tested.

When we pulled the Ehlines off after 4,626 kilometres on the Great Divide, there were dozens of goathead thorns embedded in the tires from riding through the New Mexico desert.

We didn't know we'd picked up most of them until we looked closely because the sealant had done its job and sealed the punctures.

We didn't have a single flat or gash derail us on the entire route.

Why We Built Our Own Wheels

There are lots of great complete wheelsets out there, but building our own gave us something we really value when putting together a bike for a specific type of adventure: choice.

We could choose the rim, spoke count, and hubs based on the bikes we were riding and the routes and conditions we'd be riding them through. Again, this allowed us to prioritize durability and serviceability over other things that riders who are riding different terrain or have a different style of riding might want.

We wanted to build wheels once, maintain them when necessary, and then mostly forget about them.

10,000+ Kilometres Later

The goal with these bikes was to build adventure rigs that can take us all over the world, through remote and rugged landscapes, where we can explore beautiful places, meet new people and enjoy experiencing the world from the saddles of our all-terrain freedom machines.

We set off on the Great Divide in late June and will finish the Golden Gravel Trail at the end of the fall, after putting more than 10,000 kilometres on these wheel builds.

The Great Divide was the first big test: deserts, mountains, endless gravel, rocky descents, washboard and some seriously rough terrain, all while carrying everything we needed to be self-sufficient for days at a time.

After 4,626 kilometres, we had no flats, no gashes and no issues with the rims, spokes or hubs.

So we kept the same Fluent Carbon rims, put fresh Ehlines on them, and headed out onto the Golden Gravel Trail.

Another 6,000+ kilometres later, the wheels continued to do exactly what we wanted them to do. We haven’t had to service them. We haven’t had to fix them. We haven’t had to think about them. And honestly, that's probably the biggest compliment I can give them.

Back to blog